Category Archives: Uncategorized

polypropylene and polyester strapping tools online

Fromm P328 : polypropylene and polyester strapping tool

The Fromm P328 is a battery powered poly strapping tool. This handheld combination tool can be used with 7/16” to 5/8” polypropylene and polyester straps of maximum thickness 0.041”. It can be used in automatic or semi-automatic versions and generates adjustable tension of up to 585 lbs. It applies friction weld seal that has extremely high strength. This is a lightweight tool at just 8.7 lbs and has a series of new features that make it a highly versatile tool.

Technical Specifications

The key technical specifications of this battery-run strapping tool are as follows:

  • Strap Quality: Polyester & Polypropylene Strapping
  • Strap Dimensions: Width 7/16” (12mm) to 5/8” (16mm) and thickness 0.016” (0.40mm) to 0.041” (1.05mm)
  • Adjustable Tension Force: 56 lbs (250N) to 585 lbs (2600N)
  • Adjustable Tension Speed: 2.6” to 4.9” or 67mm to 124mm per second
  • Weight: 9.3 lbs or 4.2 kg
  • Seal Type: Friction Weld
  • Seal Efficiency: Up to 75%

The Fromm P328 is considered among the toughest tools in its segment. It comes with the latest technologies and features that allow faster and easier strapping. Carry the battery bander around the warehouse without worry about its weight or air lines.

 

 

Best Pneumatic steel strapping sealer

Fromm A461 Pneumatic Steel Strapping Sealer

The Fromm A461 is a pneumatic powered steel strapping sealer. It is designed for running steel straps of width 3/4” to 1-1/4”. This is a highly robust and reliable tool that makes strapping more cost effective. It is perfectly suited for applications involving packages having small and round surface areas. This lightweight tool weighs just 9.3 lbs and its ergonomic design makes it perfect for single hand application. It uses overlap seals and applies double notch upcut joint.

The A461 is a widely popular sealer and all its common wear parts are readily available. You may order the parts online or also send the tool for repair and maintenance. Get it repaired by factory certified technicians with years of experience. Quick turnaround ensures that your operations will not have to suffer for long.

Since the Fromm A461 is a sealer and requires a tensioning tool to complete the applications. The A452 from the same brand makes just the ideal complementing tool for this purpose. This tensioner generates up to 1900 lbs of tension and works with 3/4” to 1-1/4” steel straps.

Battery tool for polystrapping

FROMM P328 : A Battery tool for Polystrapping

The Fromm P328 is a battery powered strapper designed for polyester (PET) strapping of width 1/2” to 5/8”. It is the toughest strapping tool according to Fromm. It features a series of new technologies that make it the perfect tool for packaging applications. Weighing just 8.7 lbs, it can pull adjustable tension of 56 lbs to 585 lbs which makes it a highly versatile tool. It increases packaging efficiency and ease and offers a completely new experience.

Technical Specifications

  • Strapping Quality: Embossed & Plain Polyester & Polypropylene
  • Strapping Width: 1/2” to 5/8”
  • Strapping Thickness: 0.016” to 0.041”
  • Weight: 8.7 lbs (4.2 kg)
  • Tension: Adjustable 56 lbs (250N) to 585 lbs (2600N)
  • Seal: Friction weld
  • Seal Efficiency: 75%

The P328 is a lightweight battery-run poly strapping that can be easily moved around the plant. The 5 Ah batteries provide longer runs. The latest brushless motor further increases efficiency and lasts longer due to lesser wear and tear.

Other Options

There are a few other options that can be used in place of this battery powered strapper. The Fromm P355 is a pneumatic poly bander that accepts 3/8” to 5/8” straps and pulls adjustable tension of 90 lbs to 470 lbs. The P300 is an electric sealless strapping tool that pulls 3/8” to 5/8” straps and pulls up to 360 lb tension.

The Fromm P380 is a pneumatic tool for 1/2” to 3/4” poly strapping and is another tool generating adjustable tension. The MIP-380 is a heavy-duty hand tool for poly straps of width up to 3/4”. The ASC 350 is another option for PET straps of width 1/2” and 5/8”.

Tool Repair & Accessories

All the common wear parts and accessories for the P328 are readily available for online order. Besides, professional tool repair and maintenance services are also available from experienced technicians. The tool can be repaired and returned with quick turnaround.

Fromm A483 Tool Pneumatic Steel Strapping Tool

Fromm A483 Tool Pneumatic Steel Strapping Tool

The Fromm A483 is a pneumatic steel strapping tool that delivers high reliability. If you are looking for a heavy-duty tool that accepts steel straps of width 1” and 1-1/4”, this is the perfect option. The battery-powered configuration further makes its application easier. This is a pusher type battery-run strapping tool.

Applications

This series of fromm pneumatic tools is a proven performer that can meet the most demanding needs in the non-ferrous and steel processing industries. Its delivers a double notch upcut joint. The tool is perfectly suited for use with odd-shaped and round objects. It is a proven tool for applications involving pipes, strapping bars, coils, and bundles. The Fromm A483 has proven its efficiency and effectiveness in various industries including the steel industry.

Technical Specifications

The key specifications of the Fromm A483 battery powered combination tool are as following:

  • Accepted Strapping: Steel Strapping
  • strapping dimensions: 1” – 1-1/4” (thickness 0.80mm – 1mm)
  • Weight: 18 kg
  • Tension: 7,000N and 9,000N
  • Seal: Metal pusher seal

The steel strapping tool is available in two different versions. The automatic version has single-button operation. The semi-automatic version has two-button operation.

Features

Some of the main features of the Fromm A483 are as following:

  • Highly rugged pusher-type, steel strapping tool
  • Designed for heavy-duty, high-volume shift operations
  • Highly reliable strapping tool
  • Delivers double notch upcut seal joint in a single operation
  • Proven fromm pneumatic tools in the non-ferrous and steel industries
  • Pneumatically lifts the feedwheel to make it easier to insert strap, eliminating operator effort

Seals: The Fromm A483 uses closed/push seals and clips for securing the strapping.

Order Parts & Repair

You can easily order parts for Fromm A483 online and get all the replacement parts without any difficulty. All the common wear parts are also readily available.

If the tool requires repair, it can be fixed by factory-certified technicians who have years of experience working with Fromm tools. These technicians providing Tool repair for Fromm A483 are regularly trained on the latest battery-powered strapping tools.

Fromm A483 Accessories

Different types of accessories are available to make it easier to use the Fromm A483. For example, 4 different suspension brackets allow you to mount this battery tool to be suspended in any position. This is a relatively heavy steel strapping tool that weighs 18 kg. Using these accessories can make it easier to use.

Pneumatic Combo Steel Strapping Tool Fromm A483

Pneumatic Combo Steel Strapping Tool Fromm A483

Fromm A-483 is a pneumatic pusher type combination tool for steel straps. It tensions and seals strapping of width 1 and 1-1/4 inch. It is designed for continuous and reliable operations, thus making it the perfect tool for increasing productivity. It weighs 43 lbs and is recommended to be used with a counter balance for ease of use. It is the perfect tool for mid to heavy-duty strapping applications. It uses high-tension steel strapping and can be used to apply 1-1/4 inch push seals.

Applications of Fromm A483

This steel strapping tools is designed for ease of use. The strap feeds into the tool using automatic feed wheel system. This makes it easier to load the strap every time. It is the perfect tool for strapping:

  • Steel tubes
  • Coils
  • Rods

The load can be strapped in any position. You can use it with 4 different suspension brackets to help offset its weight. It is perfectly suited for applications where there is need for continual strapping, allowing you to use it from one shift to another without a break.

Technical Specs

The main technical specifications of Fromm A483 are as following:

  • Type of Strapping: steel strapping
  • Strapping Size: Width 1 & 1-1/4 inches (25 & 32 mm); thickness 0.031 to 0.040 inch (0.80 to 1 mm)
  • Tension: 7,000N & 9,000N
  • Weight: 43 pounds (19.5 kg) including suspension
  • Seal Type: Overlap
  • Joint Type: Double notch upcut
  • Seal Efficiency: Around 75%

This pneumatic pusher tool can be used with 4 suspension brackets for ease of use and improved efficiency.

Advantages of Using A483

The A483 is a high-performance strapping tool. It has been a proven performer in the non-ferrous and steel industries. It can deliver the perfect double notch upcut seal joint in a single operation.  This helps in saving your valuable time. The feedwheel lifts automatically, thus saving any need for user effort. This makes it easy to load the strap.

A483 Accessories

All the accessories for the tool are readily available online. The following additions help in making its operation easier, improving your efficiency:

  • Normal suspension bracket A48.3401
  • Front suspension bracket A48.3406
  • Lateral suspension bracket A48.3413
  • Universal suspension bracket with air supply A48.3419

Repair & Parts

You can order all the common wear parts online. The commonly available parts include:

  • Feedwheel
  • Cutting jaw
  • Cutter jack
  • Slide jaw
  • Notching knife

Affordable tool repair services are also available fro the A-483.

Fromm A480 Pneumatic Pusher-Type Combination Steel Strapping Tool

Fromm A480 Pneumatic Pusher-Type Combination Steel Strapping Tool

The A480 is a Fromm pneumatic pusher tool designed for steel straps of width 3/8 inch to 3/4 inch. This combination tool weighs just around 10 lbs, making it a lightweight pneumatic strapping tool that performs everything including tensioning, sealing and cutting. The tool is available in two versions that pull 2,500 N and 4,500 N tension.

Applications

The A480 makes use of push-seals that make it the perfect strapping tool for narrow and round objects. This steel strapping tool is designed for strapping smaller bundles and loads like wire coils and tubes. It is a lightweight, handy and ergonomic tool that can be used in different industries.

Technical Specs

The main list specifications of the Fromm A480 are as following:

  • Strapping Type & Size: Steel strapping of width 3/8” to 3/4” and thickness 0.015” to 0.025”
  • Weight: 10.1 lbs (4.6 kg)
  • Tensioning Force: 2,500 N & 4,500 N
  • Seal Type: Overlap Seals
  • Joint Type: Single Notch Joint
  • Seal Efficiency: 75%

The A480 has a smaller foot plate which makes it the perfect steel strapping tool for use with :

  • Round packages
  • Irregular-shaped loads
  • Unique packages

Due to its unique design, the pneumatic combination strapping tool can readily squeeze into tighter places. The pusher-type tool is also known for its ergonomic design. You can also adjust the gap between the pad and roller and the cutter depth to use steel straps of different widths.

Features of A480

The main features of this Fromm pneumatic pusher tool are as following:

  • It is pneumatic pusher-type combination tool.
  • The strap tension is adjustable using basic regulation.
  • The ergonomic design has specially designed levers that make tensioning and sealing much easier.
  • It uses pusher-type seals with very high efficiency of up to 75%.
  • Low weight steel strapping tool that weighs just 10.1 lbs.
  • Uses air power for generating uniform and reliable tensioning.
  • The single notch sealer works with ordinary, super-duty and HT steel strapping.

Because this Fromm pneumatic pusher tool is a lightweight strapping tool, there is no need for suspending it during stationary applications. It is also perfectly suited for mobile applications, allowing you to carry it anywhere across the warehouse or shipping floor.

All the Fromm A480 wear parts and replacement parts are readily available for ordering online. The tool can also be sent for repair with quick turnaround. Its common wear parts include feedwheel, cutter, notching knife, and cutting jaw.

Fromm A480 Combination Pneumatic Pusher-Type Tool for Steel Strapping

Fromm A480 Combination Pneumatic Pusher-Type Tool for Steel Strapping

The Fromm A480 is a combination pneumatic pusher-type tool designed for steel straps of width 3/8 to 3/8 inch. It is a lightweight combo tool that weighs just 10.1 lbs. It is designed for both mobile and stationary strapping applications and is highly versatile.

Applications

The A-480 is a mid to heavy-duty strapping tool that is designed for strapping wire coils, tubes, bundles, bars, pipes and small-sized bundles. It is a highly versatile tool that can be used in different types of industries. It makes use of push seals which can be used for narrow and round packages.

Technical Specifications

  • Strap Type: Uniflex & Ultraflex steel strapping with capacity of 1,100 N/mm2.
  • Strapping Size: Width 3/8 inch to 3/4 inch and thickness 0.015 inch to 0.025 inch
  • Weight: 10.1 lbs (4.6 kg)
  • Tensioning Force: 2,500 N & 4,500 N
  • Seal Type: Overlap seals
  • Seal Strength: 75% (average)
  • Joint Type: Single notch joint

The Fromm A480 is an easy to use tool. It is compact and ergonomically designed for minimizing hand fatigue. It has a smaller foot plate which makes it easier to strap oddly shaped and round objects and remove the tool.

Advantages

  • The pneumatic pusher tools can also be suspended using a spring loaded balance and suspension bracket for stationary applications.
  • Can be used with suspension bracket for both vertical and horizontal applications.
  • The tool is available in two versions, with peak tension generation of 4,500 N.
  • Due to the smaller foot plate, the steel strapping tool can be easily used with odd-shaped packages. It doesn’t get stuck after you have completed the application.
  • Already a proven performer for strapping coils, pipes, bundles and bars which have smaller surface area.
  • The strap tensioning force can be adjusted easily.
  • The levers are ergonomically designed for allowing tensioning and sealing.
  • The pusher-type seals mean highly effective steel strapping over round shaped packages.

It is much more lightweight compared to other pneumatic combination tools and offers unmatched ease of use.

Accessories & Tool Repair

All the accessories, common wear parts and replacement parts are readily available for online order. The common wear parts include the feed wheel, notching knife, cutting jaw, and the cutter.

Most of the issues can be easily addressed through tool repair services provided by factory-certified technicians. They make use of the most advanced diagnostic equipment to determine the problems and address them.

Fromm A452 Pneumatic Tensioner for Steel Strapping

Fromm A452 Pneumatic Tensioner for Steel Strapping

The Fromm A452 is a pneumatic pusher-type tensioning tool designed for 3/4 inch to 1-1/4 inch steel straps. It is an extremely powerful strapping tool that generates up to 8,500 N (1,910 lbs) of tensioning force. Weighing just 9.6 pounds, it is a lightweight strapping tool that can be used for both stationary and mobile applications. Its special duck bill nose helps complete push-type and closed seals. It is considered one of the best tools for strapping round and irregular shaped objects.

Technical Specifications

  • Strap Type: Regular Duty & High-Tensile (HT) Steel Straps (Ultraflex)
  • Strap Size: Width 3/4 inch to 1-1/4 inch & thickness 0.025 inch to 0.050 inch
  • Weight: 9.6 lbs (4.4 kg)
  • Peak Tensioning Force: 1,910 lbs (8,500 N)
  • Seal Type: Push-type (Metal) or Closed seals

Eye bolt is available along with the tool for suspension during standard applications.

Advantages of Using Fromm A452

There are many advantages of using these pneumatic pusher tools:

  • It delivers one of the highest tensioning force of 8,500 N
  • Once you have achieved the desired tension, the A452 will hold onto the strap tension. There is no loss of tensioning due to the freewheel system.
  • It is a highly robust steel strapping tool.
  • The steel strapping tool also has a safety feature – the strap tension will release when the safety-push button is pressed.
  • It has extremely high tensioning speed while being silent.
  • The Fromm can be used for both stationary and mobile applications.

Because the A452 is a tensioning tool, you will need a sealer to complete the strapping applications. The Fromm A461 is one of the best tools to help complete the tasks.

As already mentioned, it is a highly rugged steel strapping tool that is designed for use in the steel/steel-processing industries. It is a lightweight tool and ergonomically designed for reducing any stress or strain on the hand.

Accessories & Repair

All types of accessories for the Fromm A452 are readily available online and can be easily ordered. You will not have to worry whenever a wear part needs to be replaced. Some of the common wear parts include the screw, spring lock washer, ring nut, handle, torsion spring, and packing ring.

If there is any need for tool repair, you can send the tool for diagnosis and repair. It will be repaired by factory-trained and certified technicians. As all the replacement parts and wear parts are readily available, the tool can be fixed with minimal turnaround.

Fromm A483 Pneumatic Steel Strapping Tool

Fromm A483 Pneumatic Steel Strapping Tool

The Fromm A483 is a pneumatic pusher-type combination steel strapping tool designed for heavy duty strapping applications. The tool is designed specifically keeping in mind that heavy weight of steel straps. It generates massive tensioning force of up to 9,000 N with the help of the pneumatic power. It also provides the feed wheel system for simple and quick strap insertion.

Applications

The A483 is a proven combination tool for regular, shift operations where there is need for very high reliability. It is perfectly suited for applications where you have to strap:

  • Steel coils
  • Rods
  • Tubes

The loads can be in any position. Because it weighs 39.7 lbs, you can use suspension brackets to help offset its weight. It is a highly powerful steel strapping for use in non-ferrous metal and steel industries.

Technical Specifications

The main technical specifications of the pneumatic pusher are as following:

  • Strapping Type: Steel strapping (Uniflex & Ultraflex capable of bearing maximum 1,100 N/mm2)
  • Strapping Size: Width 1 inch to 1-1/4 inch & thickness 0.031 inch to 0.040 inch
  • Weight: 39.7 pounds (18 kg)
  • Seal Type: Overlap Seal
  • Joint Type: Double notch upcut joint
  • Joint Strength: 75% (Average)

You can order 4 different suspension brackets for use with this Fromm tool. The order has to be placed separately.

Advantages

The Fromm A483 offers the following advantages:

  • It is one of the most robust pusher type steel strapping available.
  • It is designed to deliver highly reliable output for continuous, shift operations.
  • Perfectly suited for highly-demanding operations.
  • It delivers a perfect double notch upcut seal joint in a single operation.
  • It is a high-performance steel strapping tool that has been proven in the non-ferrous and steel industries.
  • It is extremely easy to insert the strap due to the unique feed wheel design. It can be pneumatically lifted and eliminates any need for operator effort.

The pneumatic pusher weighs around 40 lbs, but you will not have to worry about it due to the 4 different suspension brackets that can be used to suspend it. It can be suspended in almost any position.

Repair & Accessories

All A-483 accessories are available online, including the common wear parts. Some of the common parts that need replacement include the feedwheel, notching knife, cutter jack, slide jaw, and cutting jaw.

You can also get manufacturer-certified tool repair services to ensure that the A-483 keeps working efficiently for years.

Fromm P331

Fromm P331

The Fromm P331 is a battery powered plastic strapping tool that is considered one of the most powerful and versatile banding tool for 3/4 inch to 1-1/4 inch polyester straps. This staggering banding tool can generate up to 1,570 lbs of tensioning force. There is almost no other battery-powered tool that is as powerful and capable of strapping 1-1/4 inch straps.

Use this polyester strapping tool in full automatic mode using just 2-button operation. This helps in increasing efficiency and productivity. It is a highly reliable and durable tool that delivers high level of performance every time.

Technical Specifications

  • Strapping Type: Polypropylene & Polyester
  • Strapping Size: 3/4 inch to 1-1/4 inch
  • Maximum Tensioning Force: 1,570 pounds
  • Weight: 15 lbs
  • Seal Type: Friction Weld

The Fromm P331 is the perfect battery powered tool for heavy duty applications. It allows adjusting strap tensioning force and sealing and cooling times for highly secure and reliable banding. It can be used in dual-button mode in manual and easy single-button mode in semi-auto. Then there is the full-auto mode that makes your banding applications effortless.

Features

Some of the main features of the Fromm P331 battery-powered poly strapping tool are as following:

  • Special high-tension friction weld poly strapping tool designed for heavy duty applications.
  • Features a highly robust design which his service friendly and guarantees high level of reliability. This helps in keeping down tool repair needs.
  • Switch between single-button and dual-button modes by just turning the adjustment knob.
  • Full automatic version allows single-button operation and enables tool tensioning and welding automatically.
  • High level of tensioning force up to 1,570 pounds
  • High level of operational efficiency and performance for heavy duty applications and where high productivity is needed.
  • Highly reliable and superior friction weld seal
  • Adjust the seal time and the strap tension separately with the adjustment system. Operator will have full control over the operation.

Alternatives

The fromm p329 is designed for smaller-width polyester strapping needs of 5/8 to 3/4 inch. It can be used with both polyester and polypropylene strapping. The fromm p328, on the other hand, is designed for 7/16 to 5/8 inch poly strapping.

The Fromm P331 has a unique design for minimal wear and tear. It has brushless motor technology that further helps in minimizing maintenance and repair needs. But all its accessories are readily available for replacement.