Tag Archives: a461 sealer

Pneumatic Tools for Strapping

Pneumatic Tools for Strapping

A483 pusher tool, A452 tensioner, A461 Sealer, A480 Pusher tool

Are you looking for the most reliable pneumatic steel strapping tools? Here are the most widely used and tested steel strapping tools from Fromm to meet your different needs.

A483 Pusher Tool

The Fromm A483 is a pneumatic combination tool for tensioning and sealing steel strapping available in 2 models – for 1-1/4 inch and for 1-inch steel strapping. It weighs around 39 lbs yet it is capable of withstanding continual operation without any issues. It is designed to be used with high-tensile steel strapping for heavy duty applications.

A452 Tensioner

The Fromm A452 tensioner is a pneumatic push-type tensioner designed for strapping 3/4 inch and 1-1/4 inch steel straps. It is well known for generating high level of strapping tension (8,500 N or 1,910 pounds). Thanks to its unique free-wheeling system, there is no loss of strap tension on completing the tensioning cycle.

The A452 weighs around 9.6 pounds, which makes it a lightweight steel strapping tensioner that can be used for both stationary and mobile applications. It is designed for speed and rugged applications. The angled duck bill nose means push/closed seals. It can be used with both high tensile and regular duty steel strapping.

A461 Sealer

The Fromm A461 Sealer is a pneumatic steel strapping sealer for 3/4 inch to 1-1/4 inch steel straps. It is designed to allow the operator to complete tasks with single hand. This steel strapping sealer from Fromm applies upcut double-notch joint. A single push will result in secure and smooth seal application. It has a special safety system preventing defective seal joints because of operator error, thus making it a highly reliable tool.

This Fromm sealer is considered to be one of the strongest pneumatic tools, as it can generate peak tensioning force of 1,900 lbs. It is a lightweight sealer that weighs just around 9.3 lbs.

A480 Pusher Tool

The Fromm A480 Pusher is a pneumatic combination steel strapping tool for 3/8 inch to 3/4 inch steel straps. It has relatively lower weight compared to its other counterparts in the same segment. This eliminates the need to suspend it during application. In other words, it is considered a better steel strapping combo tool for mobile applications.

The A480 Pusher tool weighs around 9.9 pounds. It is perfect for strapping wire coils, tubes and various types of small bundles. It makes use of push-seals, which are perfect for narrow and round packages. Its smaller size gives it an edge, making it one of the lightest and easiest pneumatic tools to use for steel strapping.